Monday 29 May 2017

DIY Mobile recharging holder thingy.

Don't get distracted by the many switches. It's about the felt pocket.


As you can see from the picture, it is a good thing, I'm not in advertising. I don't even know what to call this. Mobile recharging pocket from felt?
Anyway, I've been a bit fed up with the cable-mobile-lying around thing and stumbled over a box with felt in the cellar and remembered I actually had seen something like this for sale (for about 5 Euros... but why buy something when you can make it yourself?!). So I made this. I found out there are lots of tutorials to make these online, but here you go, this is my pattern. 







The entire piece is 38,7cm x 10,5 cm big, the felt is about 3mm thick. (15,23" x 4,13", thickness 0,12"). The width is exactly half of an A4 sheet, it's a bit longer, though. 
If your piece of felt is big enough you can cut and fold the pattern on the dotted lines. If not, you can make up to 3 pieces (cutting and extra "pocket piece" and an extra "enforcement piece" for the top). Don't forget to cut a small hole at the bottom (or if you don't fold the bottom over, just leave the seam open about 2cm for the cable). Then just stitch around everything - fini. 

This prototype (which is fully functional, so I doubt I will make more of them, unless asked) is just plain, but you could add a label on the front pocket, or insert it into the side seam. You can use different colour felt or pieces in different colours. You could use contrast coloured yarn (maybe extra thick?) or paint it, or embroider something on it. Or do some appliqué. You can add an extra pocket for the cable (on the front or the back or both) and you could add a press-stud at the very top and the very bottom to take it with you and not loose the cables. You can lengthen it if you want to include your mobile in that pocket. You can widen it or make it smaller if your mobile is smaller than mine (it fits a Samsung Galaxy S3 fine). Ahh, the possibilities!


No comments:

Post a Comment